The SeedSigner is an offline device for signing air-gaped bitcoin transactions made of off-the-shelf components in a 3D-printed enclosure. This product was developed by the Free Open Source SeedSigner project.
Select from the available range of case colors:
- orange
- red
- transparent
Parts list:
- 1x Raspberry Pi zero
- 1x Waveshare LCD display 1.3 inch 240x240 pixel
- 1x Raspberry Pi camera 5mp 1080p sensor ov5647
- 1x 150mm adapter cable (to connect Raspberry Pi zero and camera)
- 1x 2x20 GPIO pin header
- 1x 16GB microSD card
- 1x 3D-printed open pill case (orange)
- 1x M2.5 knurled nut