Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"
Nerdminer 2.8"

Nerdminer 2.8"

  • Sale
  • (€62,00)
Tax included. Shipping calculated at checkout.

This complete silence 2.8-Inch Touchscreen Nerdminer v2 redefines Bitcoin mining, making it more accessible than ever before.

This device opens the door to the world of Bitcoin mining, even for beginners with no prior knowledge. In just 5 minutes, you can transform your workspace into an efficient Bitcoin mining station.

With our device, Bitcoin mining is as simple as playing the lottery, with the added advantage that anyone can participate. Ease of use is paramount, allowing you to dive into mining with minimal effort.

The case provides a perfect position for the display on your desk at either a 70° or 30° angle.

Renowned Nerdminer software featuring a triple-display interface for Mining, Blockclock, and Global Statistics.

Minimal energy consumption of just 1.6 watts with an impressive Bitcoin mining hashrate of approximately 55 KH/S. 

Material

PLA (Polylactic Acid) is one of the most commonly used materials in FDM printers. These polylactides are synthetic polymers that belong to the group of polyesters and are made up of many chemically bonded lactic acid molecules. PLA is made from renewable raw materials such as corn starch and is industrially compostable. It is therefore also more environmentally friendly than other plastics.

PETG (Polyethylene terephthalate glycol-modified) s a modified version of PET, the plastic you likely associate with disposable water bottles and other clear containers. The material is extremely resistant to chemical substances, making PETG perfect for use in medicine. This also means that it can be sterilized easily. The material can be recycled, including prints and misprints, making PETG an environmentally friendly material.

Certificates
Dimensions

70° angle > length 90mm, height 53mm, depth 39mm

30° angle > length 90mm, height 39mm, depth 53mm

Documents

Detailed specifications of this development board:

  • Dual-core MCU, integrated WI-FI and Bluetooth functions
  • Frequency can reach 240MHz
  • 520KB SRAM, 448KB ROM, Flash size is 4MB
  • Module size 50.0×86.0mm
  • Operating Voltage: 5V
  • Power consumption: approximately 115mA
  • Product weight: approximately 50g
  • 2.8-inch color TFT display screen with ILI9341 driver chip
  • Display resolution: 240x320px with resistive touchscreen
  • Backlight control circuit
  • TF card interface for external storage
  • Serial interface
  • Temperature and humidity sensor interface (DHT11 interface) and reserved IO port interface
  • It can be programmed with: Arduino IDE, MicroPython, ESP-IDF
Disclaimer

The finish on all 3d printed products will vary slightly on each unit. As these are made with a process called FDM (layer by layer) there can/will be minor imperfections. This product is a decorative item only.

EU GPSR related product information

Manufacturer: Satoshistore FlexCo

Address: Löfflerweg 22b, 6060 Hall in Tirol, AUT

Phone: +43 (0)720 22 92 92

Email: hello@satoshistore.io