Nerdminer v2 - Black Friday Deal
Nerdminer v2 - Black Friday Deal

Nerdminer v2 - Black Friday Deal

  • Sale
  • (Dhs. 254.00)
  • Dhs. 305.00
Shipping calculated at checkout.

THIS IS A BLACK FRIDAY WEEK ONLY DEAL!

Special Edition Nerdminer with orange Bitcoin and orange Buttons

Fully Assembled and Flashed - Ready to go!

Including our brand new Nerdminer Keychain* as a Gift.

*The Keychain shows one side with a nerdminer sign - the other side shows the bitcoin logo.

 

You can find additional setup and usage Information here at our > Blog Post!

Latest Software Version: Nerdminer 1.6.2

SatoshistoreIO Case Version: Case v12

The NerdSoloMiner v2 - Project. This is a free and open source project that let you try to reach a bitcoin block with a small piece of hardware. It is like playing the lottery but the main aim of this project is to let you learn more about bitcoin mining and to have a beautiful piece of hardware at home at your desktop or even to go. 

Power consumption:

  • Device 5V | 0.14A | 0.71W (using a measuring device)
  • Black Fan 5V | 0.126A | 0.63W (manufacturer information)
  • RGB Fan 5V | 0.13A | 0.65W  (manufacturer information)

What is in the Box (Assembled):

  • ESP32 Microcontroller
  • 5V Lüfter or passive Cooling + 3D Printed fake Fan
  • 3D Printed Case (Special Edition with Orange Bitcoin and Buttons)
  • Guideline
  • Additional Stuff
  • Cable is not included (USB-C Connector)
  • Nerdminer Keychain (One Side > Nerdminer / On Side > Bitcoin)
Material

PLA (Polylactic Acid) is one of the most commonly used materials in FDM printers. These polylactides are synthetic polymers that belong to the group of polyesters and are made up of many chemically bonded lactic acid molecules. PLA is made from renewable raw materials such as corn starch and is industrially compostable. It is therefore also more environmentally friendly than other plastics.

PETG (Polyethylene terephthalate glycol-modified) s a modified version of PET, the plastic you likely associate with disposable water bottles and other clear containers. The material is extremely resistant to chemical substances, making PETG perfect for use in medicine. This also means that it can be sterilized easily. The material can be recycled, including prints and misprints, making PETG an environmentally friendly material.

Certificates
Dimensions

Approximately: with fan 72mm x 40mm x 40mm

Documents

Microcontroller:

CE-EM EMC AOC

CE-RF RED

FCC

MIC_Radio

ROSH

Fan:

Winsinn: FCC, CE, RoHS

Disclaimer

The finish on all 3d printed products will vary slightly on each unit. As these are made with a process called FDM (layer by layer) there can/will be minor imperfections. This product is a decorative item only.